accesssories | Fitting options
|
Bolt Hole 10mm including 10mm Grip Neck Pintes |
Grip Neck Pintles
M10 Retro-fit Grip Neck Pintle |
with Grip Neck Adaptors |
Code | Shape | Meterial | Adaptor Size | Tube Size I.D. | O.D. | Wall | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S11 | Round | Nylon |
11mm 7/16" |
10.9 | 12.7 | 0.9 | |||||||||||||
| S14 | Round | Nylon |
14mm 9/16" |
13.6 | 16.0 | 1.2 | |||||||||||||
| S17 | Round | Nylon |
17mm 11/16" |
16.6 | 19.0 | 1.2 | |||||||||||||
| S17SQ | Square | Nylon |
17mm 11/16" |
16.6 | 19.0 SQ | 1.2 | |||||||||||||
| S19 | Round | Nylon |
19mm 3/4" |
19.0 | 22.2 | 1.6 | |||||||||||||
| Code | Size | S23 | Round | Nylon |
23mm 7/8" |
23.0 | 25.4 | 1.2 | |||||||||||
| -GN |
8mm OD x 39mm 5/16" OD x 1 9/16" |
S23SQ | Square | Nylon |
23mm 7/8" |
22.0 | 25.4 SQ | 1.6 | |||||||||||
Pintle Bolts
|
With M10 Threaded Tube Ends
|
with 3/8" Fittings |
|||||||||||||||||
| Code | Part | Information | |||||||||||||||||
| 38WTEE |  |
Drill a 12mm (1/2") hole through the base and fit this down from the top, and screw the castor up into it through a washer. | |||||||||||||||||
| Code | Size (thread x length) | ||||||||||||||||||
| 100.M10x30 |
M10 x 30mm |
||||||||||||||||||
| 100.M10x40 |
M10 x 40mm |
38WNUT |  |
The base must be 3mm (1/8") thick, or washers of at least 25mm (1") OD used on both side to spread the load. | |||||||||||||||
| 100.M10x50 |
M10 x 50mm |
||||||||||||||||||
| 100.3/8x19 |
3/8" x 19mm 3/8" x 3/4" |
||||||||||||||||||
| 100.3/8x30 |
3/8" x 30mm 3/8" x 1 3/16" |
ENDPLUG25 |  |
Fits horizontal 1" x 1.6 square tube. Holds a 3/8" Whit nut in position 32mm (11/4") along a horizontal tube. | |||||||||||||||
| 100.3/8x40 |
3/8" x 40mm 3/8" x 1 11/16" |
||||||||||||||||||
| 100.3/8x50 |
3/8" x 50mm 3/8" x 2" |
Use standard M10X40 bolt to attach castors to these tube ends. | |||||||||||||||||
|
Bolt Hole 12mm Note: Can be changed to 8mm or 10mm with reducing bushes Part numbers: RB1/2-08 RB1/2-10 |
Pintle Bolts
|
with Expanding Adaptors
|
With M12 Threaded Tube Ends
|
||||||||||||||||
| Code | Shape | Material | Size | Tube Size I.D. Range |
with 1/2" Solid Pintles
The -AS22 stem consists of the 19mm (3/4") round solid stem, fitted with a square nylon sleeve |
||||||||||||||
| Steel | Stainless | ||||||||||||||||||
| Code | Part | Size (diameter x length) | -ER19 | -ER19SS | Round | Nylon |
19mm |
18.5 - 21.0 | |||||||||||
| -E | Bolt only |
M12x81 Standard (0.5" x 3.187") |
-ER22 | -ER22SS | Round | Nylon |
22mm |
21.5 - 24.0 | |||||||||||
| -ESS | Bolt only |
M12x65 Stainless Stl (0.5"x 2.562") |
-ER22R | -ER22RSS | Round | Rubber |
22mm |
21.5 - 24.0 | |||||||||||
| -E12x35 | Bolt only |
M12x35 (0.5" x 1.375") |
-ER28 | -ER28SS | Round | Nylon |
28mm |
25.0 - 28.0 | |||||||||||
| -E12x40 | Bolt only |
M12x40 (0.5" x 1.562") |
-ES19 | -ES19SS | Square | Nylon |
19mm |
18.5 - 21.0 | Code | Stem O.D. | Tube Size OD x wall |
Cross Drill Hole distance from end x hole diameter |
|||||||
| -E12x45 | Bolt only |
M12x45 (1/2" x 1 3/4") |
-ES22 | -ES22SS | Square | Nylon |
22mm |
21.5 - 24.0 | |||||||||||
| -E12x50 | Bolt only |
M12x50 (1/2" x 2") |
-ES22R | -ES22RSS | Square | Rubber |
22mm |
21.5 - 24.0 | -AR19 |
19.0mm round |
22 x 1.2mm |
19.0 x 8mm (0.852" x 5/16") |
|||||||
| -E12x55 | Bolt only |
M12x55 (1/2" x 2 1/8") |
-ES28 | -ES28SS | Square | Nylon |
28mm |
25.0 - 28.0 | -AR22 |
22.0mm round |
25 x 1.6mm |
19.0 x 8mm (1" x 5/16") |
|||||||
| -E12x65 | Bolt only |
M12x65 (0.5" x 2.562") |
Expanding adaptors can confidently be used on castors up to 125mm (5") wheel diameter and 150kg (330lb) load capacity (and up to 200mm (8") castors only at lighter usage and loads <80kg). The castor and adaptor are ordered as two separate items e.g. MSQ125G/MZH (castor) AND (on the next line) -ER22 (the pintle and adaptor). The factory will assemble them prior to despatch. If ordering the above castor with the stem only (no adaptor required) The order should read: MSQ125G/MZH (castor) AND (on the next line) -E the pintle only. The factory will assemble them prior to despatch. If ordering the adaptor as a spare part add 'SP-ADAP' to the part number, i.e. SP-ADAPER22. | -AS22 |
-AR19 with adaptor 22.0mm square |
25 x1.6mm SQ |
19.0 x 8mm (0.852" x 5/16") |
||||||||||||
| -E1/2x30 | Bolt only |
1/2" UNF x 1 1/8" |
-AR28 |
-28.0mm round |
32 x 1.6mm |
19.0 x 8mm (3/4" x 5/16") |
|||||||||||||
| -E1/2x40 | Bolt only |
1/2" UNF x 1 9/16" |
The castor and pintle are ordered as two separate items e.g. MSQ125G/MZH (castor) AND (on the next line) -AR22 (the pintle). The factory will assemble them prior to despatch. If ordering the pintle only, add 'SP' (spare part) to the part number e.g. SP-AR22. | ||||||||||||||||
| -E1/2x50 | Bolt only |
1/2" UNF x 2" |
|||||||||||||||||