Fallshaw logo

Freecall 1800 333 002
sales@fallshaw.com.au


Fittings for 10 mm and 12 mm bolt hole castors

Pintle bolts with M10 threaded tube ends

Pintle bolts with M10 threaded tube ends
Thread x Length Order code
M10 x 30 mm SPM10X30ZP Buy
M10 x 40 mm SPM10X40ZP Buy
M10 x 50 mm SPM10X50ZP Buy
3/8" x 19 mm SP3/8X19ZP Buy
3/8" x 30 mm SP3/8X30ZP Buy
3/8" x 40 mm SP3/8X40ZP Buy
3/8" x 50 mm SP3/8X50ZP Buy

3/8" Fittings

Description Order code
38WTEE Drill a 12 mm (1/2”) hole through the base and fit this down from the top, and screw the castor up into it through a washer. 38WTEE Buy
38WNUT The base must be 3 mm (1/8”) thick, or washers of at least 25 mm (1”) OD used on both side to spread the load. 38WNUT Buy
ENDPLUG25 Fits horizontal 1” x 1.6 square tube. Holds a 3/8” Whit nut in position 32 mm along a horizontal tube. ENDPLUG25 Buy

Grip-neck pintles (fits L, K and M Series castors)

Grip-neck pintle
Description Order code
For L series, M10 grip neck pintles are supplied loose to be retro-fitted.
Size: 8 mm OD x 39 mm
-GN Buy
For K and M series, M12 grip neck pintles are supplied loose to be retro-fitted.
Size: 8 mm OD x 39 mm
-GNKM Buy

Grip-neck pintle adapters

Round nylon

Adapter size Tube size ID OD Wall Order code
11 10.9 12.7 0.9 S11 Buy
14 13.6 16 1.2 S14 Buy
17 16.6 19 1.2 S17 Buy
17 16.6 19 SQ 1.2 S17SQ Buy
19 19 22.2 1.6 S19 Buy
23 23 25.4 1.2 S23 Buy
23 23 25.4SQ 1.6 S23SQ Buy
Fallshaw Wheels & Castors is a member of the Fallshaw Group