loader
Pneumatic_steel_feature.tif

Steel centred tubeless pneumatics:

  • Welded one piece strong wobble free tubeless wheels. Centres up to and including the 500x6 are manufactured from 1.8mm steel, and the 650x8 is of 2mm thick steel (NOTE: -some of the cheaper centres on the market are manufactured from steel as thin as 0.6mm)
  • Wheels can be retro-fitted with tubes
  • Tubeless tyres on steel rims can be fitted into H forks. See size, mounting and product codes

Bearings:

'Deep Groove' shielded bearings fitted to a toughened heavy duty housing gives true running and extra strength (NOTE: Deep groove bearings can last up to 3 times longer than normal pressed bearings).

Tyres:

4 ply (6 ply on HWY tread) for longer, rougher life (many imports use 2 ply).

For wheels pulled or pushed at low speeds (not driven) the tread pattern is not critical. The following are standard; other patterns can be offered by negotiation.

  • LUG: General purpose outdoor use. Strongly marked cross lines on a fairly flat tread surface. Good for running in straight lines.
  • LGG: Grey rubber LUG - non-marking of floors
  • DMD: Diamond shaped pads on a flatter surface. Often used in rougher construction sites. Good for softer grassed surfaces, but may become clogged with mud.
  • IND: The normal industrial tread, a round profile with an even pattern for general use.
  • ZGG: Grey rubber zig-zag - non-marking of floors
  • KNO: This knobbly pattern is often preferred for outdoor use, where its strongly marked tread takes a good grip on soft ground.
  • GRA: A wide tread, designed specifically with ride-on mowers and associated equipment in mind. Will traverse virtually any surface they come across.

WARNING

The load and cold inflation pressures imposed on the combination of tyre and wheel must not exceed the recommendations, even though the tyre is approved for a higher load or inflation pressure.

USE OF PNEUMATIC WHEELS OTHER THAN AS RECOMMENDED CAN BE DANGEROUS.

* ID of bearing is reduced by inserting flanged nylon bush into the standard bearing - add 4mm to hub width

Tread Pattern

diameter width

Diameter x Width

tyre material

Wheel Code

load capacity

Capacity at speeds

DO NOT EXCEED
  bearing type

Bearing Code

bearing type

Bearing Type

hub width bore

Hub Width x Bore

mm / inches
inflation pressure

Inflation Pressure

8 km/hr

5mph

15 km/hr

10mph

tread

220x54

83/4 x 21/8"

T250X4LUG

120kg

265lb

100kg

220lb

Add any bearing code to any wheel code in this section -SB20 B Deep Groove BallB Deep Groove Ball

60 x 20

23/8" x 3/4

210. kpa

30 psi

DO NOT over inflate
tread

250x70

10 x 3/4"

T300X4DMD

120kg

265lb

100kg

165lb

-SB34 B Deep Groove BallB Deep Groove Ball

60 x 19

3/4 x 23/8"

tread

265x70

101/2x 23/4"

T350X4STR

140kg

310lb

110kg

240lb

tread

275x65

101/2 x 23/4"

T250X6IND

180kg

395lb

160kg

350lb

-SB58 B Deep Groove BallB Deep Groove Ball

16 x 60

5/8 x 23/8"

tread

265x70

11 x 21/2"

T350X6KNO

140kg

310lb

110kg

240lb

Add any bearing code to any wheel code in this section -SB10 B Deep Groove BallB Deep Groove Ball

1" x 60

1 x 23/8"

tread

320x80

125/8 x 31/8"

T400X8HWY

180kg

395lb

160kg

350lb

-SB20 B Deep Groove BallB Deep Groove Ball

20 x 60

20mm x 23/8"

-SB34 B Deep Groove BallB Deep Groove Ball

19 x 60

3/4 x 23/8"

tread

400x100

16x4"

T400X8KNO

200kg

440lb

180kg

395lb

-SB58 B Deep Groove BallB Deep Groove Ball

16 x 60

5/8 x 23/8"

tread

400x100

16x4"

T400X8HWY

360kg

795lb

340kg

750lb

  -SQ10 B Deep Groove BallQ Ball Precision

1" x 72

1 x 27/8"

tread

400x100

16x4"

T400X8KNO

220kg

485lb

200kg

440lb

Add any bearing code to any wheel code in this section -SB10 B Deep Groove BallB Deep Groove Ball

1" x 107

1 x 41/4"

-SB20

20 x 107

20mm x 41/4"

tread

330x125

131/2 x 5"

T500X6GRA

220kg

485lb

200kg

440lb

-SB34

19 x 107

3/4 x 41/4"

-SB58

16 x 107

5/8 x 41/4"

tread

420x165

161/2 x 61/2"

T650X8GRA

230kg

510lb

200kg

440lb

  -SB10 B Deep Groove BallB Deep Groove Ball

1" x 150

1 x 6"

  -SB20

20 x 150

20mm x 6"

  -SB34

19 x 150

3/4 x 6"

  -SB58

16 x 150

5/8 x 6"